The Christisen's

I have a couple of brand new laser head tray drive gears available if anyone is interested. This is teh intermediate compound gear that allows the small dc motor to position the laser head on the rails. It fits the RCD1 for sure and should also fit CDD-522, D740, RCD1.3D, CDM14 & CDM-14. The cost is $40 each and that includes USPS priority shipping.

Rough dimensions:
Height 0.563″
Outer gear diameter 0.776″
Inner gear diameter 0.198″

[Show as slideshow]

Southern Swing ’97. I scanned this cruise book into pdf for anybody who is interested.

Goto Cruise Book, PDF 141MB

This is a shot of a mine being destroyed by EOD with the Curts in the background. I believe this was during the first gulf war. I came across this 8×10 while cranking in the Chief’s mess onboard the Curts.

Your lamp will probably last a lot longer than the TV thinks it should. This procedure will reset the lamp timer so you don’t have to look at that annoying message every time you turn your tv on. Remember that the “lamp” indicator light on the lower left of the set will stay on until the lamp is actually replaced. I had to buy a replacement lamp to get this information, could not find it anywhere for these model numbers.

Press the volume down button on the projection display and hold down the zero button on the remote control at the same time for more than 5 seconds. When the reset procedure is complete, a message will display that the lamp timer was reset to zero.

This procedure will work for Panasonic models: PT-52LCX66 , PT-56LCX66 , PT-61LCX66 , PT-52LCX16 , PT-56LCX16 , PT-61LCX16

[Show as slideshow]

Hyundai Heavy Industries was installing a jacket at a platform near “Neelam Field-Bombay High” when the sea bed collapsed. The platform was gone in less than five minutes.

[Show as slideshow]